The whole
catalog.
Potting Bench
Built this for my mom to replace a couple rickety, primitive tables. All lumber is treated and sealed. Sink is an old cast iron Kohler I got off of FB marketplace. Fans are Vevor (modified mounting brackets) with 3d printed center covers. The uprights are old porch supports from a house up the road!
Aggie Cornhole Boards
Built for a charity banquet as an auction item.
Kids Bed
Built this for my oldest son. I reused the lower guard from the bunk beds build for the headboard supports and the desk top from from old cantilever desk build as the headboard.
Wells Cargo Trailer Resto
Won this off of Copart for a decent price. Its 1994 Well Cargo 6x12. Very stout, I'm presuming it would be under HD badge nowadays. While the bar build was the first time I sprayed a 2k finish from a HVLP gun, this project was the first time I've sprayed automotive finish. Also used white raptor liner on the front and back as well as Henry's Tropicool on the roof, which actually does an amazing job at keeping temps down in the middle of summer. New tires, new lacquered wall panels, eTrack and led lighting everywhere.
The Dadirondack
Built this for my dad out of several offcuts that I got for free from a local sawmill; destined for the burn pile! Top-coated with a marine sealer.
Scrapwood Planters
Built these planters for a buddy out of various pieces of scrap wood I had laying around. The inner box sides are all cedar and I lined the inside with polyethylene to give it a little more protection.
Auction Trailer Rebuild
Picked this up at a local auction for $120 in not the best shape. Did a bunch of reworking to it so I could use it to haul long lengths of lumber and steel as well as sheet goods. Its been incredibly useful!
Hickory Stools
Made three of these for a buddy. Seat carving and logo came out great on the CNC!
Monster Truck Garage
Modeled this in Sketchup. Needless to say the build was a bit tedious lol
Spa Decor
I was contracted to build several pieces for a local spa including the main sign on the building.
Bar Build
A full custom bar built for a friend's shop, next to his golf simulator. Oak plywood carcasses, solid red oak trim and rail, wenge-accented bar top. Welded steel supports under the top, Philips Hue lighting run through every section, and a CNC-cut sign. Built in my shop, installed in his.
Restomod Golf Cart
A clapped out 1989 Club Car DS, stripped to the frame and swapped out everything electrical but the motor. 36V resistor to 48V solid-state controller with custom wiring throughout. Fabricated many new parts, the rear half of the roof is a dog kennel liner, and the front bumper cost a dollar and used to be exercise equipment.
Homemade CNC
Built from DIY Builds' YouTube series (https://www.diybuilds.ca/) during the 2020 lockdown, from parts off eBay and Amazon, Home Depot plywood, and an engineering desktop pulled from the e-waste pile at work. Running in a few months. It's since cut the bar's sign and fluted casing on the Bar Build, amongst many other projects. After the initial build I applied some left-over heavy duty adjustable feet and amazon retractable wheels to the legs, and traded its DIN rail for linear rails on the Y axis.
Church Stage Lights
Background stage lighting for our local church which allowed me to get my feet wet with Arduino programming! General chevron layout was from another church's Amplify program.
Cornhole Boards - v2
Second go at cornhole boards. Far simpler than v1!
Cornhole Boards - v1
My first try at Cornhole boards, Definitely went prototype-mode lol
_4-3.jpg&w=3840&q=75&dpl=dpl_9Med2SWkivVNTQK7boUK5sAZawZn)
Bottle Lamp 4 - Crown Apple
Another request, this time in green!
Dog House - 1
A pallet, scrap, and some new stock and we have a sturdy canine abode.
_4-3-2400x1800.webp&w=3840&q=75&dpl=dpl_9Med2SWkivVNTQK7boUK5sAZawZn)
Bottle Lamps - Misc
Other examples of my bottle lamp phase, including a nightlight!
Halltree - 1
Built this first one for my mom from a 1940s pantry door
Armorer's Bench
Built for my stepdad to assemble and maintain pew-pews!
Playset Resto - v1
This is the first time I restored the kid's playset after we bought it from another family. I had to replace a few pieces but overall, it just needed cleaned and refinished.
Christmas Yard Decor
First swing at some yard decorations!
Bottle Lamp 3 - Crown XO
Built this one for a buddy. Purple shade went with it pretty well.
Bottle Lamp 2 - Jack Daniels
Second one I built for my dad!
Bottle Lamp 1 - Crown Black
First bottle lamp of several built. Drilled with a diamond tipped hole saw bit and filled with amber glass.
Pallet Wood End Tables
The pallet wood thing was pretty popular around this time so I procured one and explored an idea.
Pirate Treasure Chest
This was a quick project for my son, where I bought a premade chest from Hobby Lobby, roughed it up a little bit, blackened it with a mapp gas torch, and applied some finish.